J7MC
Manueller Motorstarter (Motorschutzschalter – MPCB)
MPCB-System, Schutz vor Überlastung, Phasenausfall und Kurzschluss
- Geringere Verdrahtungs- und Wartungszeit dank Push-in-Plus-Anschlüssen
- In Kombination mit dem Magnetschützmodell J7KC ideal geeignet für die Steuerung von Motoren der Klasse AC-3, 2,2 kW (200 bis 240 VAC) * oder 5,5 kW (380 bis 440 VAC).
- Wippschalter (Standardtyp) und Drehschalter (Hochleistungsausführung)
- Hohe Schaltkapazität (max. 100 kA/440 VAC)
- Standardmäßig mit einer Abdeckung für die Bedienelemente ausgestattet, um versehentliche Einstellungsänderungen zu verhindern. Abschließbar mit einem Vorhängeschloss, um die Sicherheit beim Einschalten zu gewährleisten.
- Zertifiziert gemäß den wichtigsten Sicherheitsstandards
Spezifikationen & Bestellinfo
Ordering Information
Main unit
Rocker switch (standard type)
| Rated current (A)(Values in () are the current setting range) | Order code |
|---|---|
| 0.16 (0.1-0.16) | J7MC-3P-E16 |
| 0.25 (0.16-0.25) | J7MC-3P-E25 |
| 0.40 (0.25-0.4) | J7MC-3P-E4 |
| 0.63 (0.4-0.63) | J7MC-3P-E63 |
| 1 (0.63-1) | J7MC-3P-1 |
| 1.6 (1-1.6) | J7MC-3P-1E6 |
| 2.5 (1.6-2.5) | J7MC-3P-2E5 |
| 4 (2.5-4) | J7MC-3P-4 |
| 6.3 (4-6.3) | J7MC-3P-6 |
| 10 (6.3-10) | J7MC-3P-10 |
| 13 (9-13) | J7MC-3P-13 |
| 16 (11-16) | J7MC-3P-16 |
| 20 (14-20) | J7MC-3P-20 |
Rotary switch (high-performance type)
| Rated current (A) (Values in () are the current setting range) | Order code |
|---|---|
| 0.16 (0.1-0.16) | J7MC-3R-E16 |
| 0.25 (0.16-0.25) | J7MC-3R-E25 |
| 0.40 (0.25-0.4) | J7MC-3R-E4 |
| 0.63 (0.4-0.63) | J7MC-3R-E63 |
| 1 (0.63-1) | J7MC-3R-1 |
| 1.6 (1-1.6) | J7MC-3R-1E6 |
| 2.5 (1.6-2.5) | J7MC-3R-2E5 |
| 4 (2.5-4) | J7MC-3R-4 |
| 6.3 (4-6.3) | J7MC-3R-6 |
| 10 (6.3-10) | J7MC-3R-10 |
| 13 (9-13) | J7MC-3R-13 |
| 16 (11-16) | J7MC-3R-16 |
| 20 (14-20) | J7MC-3R-20 |
Options (Order Separately)
Auxiliary contact unit
| Auxiliary contact | Order code |
|---|---|
| SPST-1NO | J73MC-W-10 |
| SPST-1NC | J73MC-W-01 |
Alarm contact unit
| Auxiliary contact | Order code |
|---|---|
| SPST-1NO | J73MC-K-10 |
| SPST-1NC | J73MC-K-01 |
Insulation stop
| Minimum order (bag) | Order code | |
|---|---|---|
| 1 (10 pcs./bag) |
For main unit | J77MC-A |
| For optional unit (For auxiliary contact unit and alarm contact unit) |
J77MC-B |
Specifications
J7MC-3P-⬜ (standard
type)
| Rated current
2
Maximum thermal current setting value. In [A] |
Current setting range Rated operating current [A] |
Instantaneous trip current [A] |
3-phase standard motor capacity
and full load current
2
Full load currents are values for 200 VAC
/ 50 Hz, 400 VAC / 50 Hz, 4P reference motors.
Before applying them, check the full load current of the motor used. |
Rated breaking current Icu [kA] | |||||
|---|---|---|---|---|---|---|---|---|---|
| 200-240 VAC | 380-440 VAC | ||||||||
| Capacity [kW] | Current [A] | Capacity [kW] | Current [A] | 240 VAC | 415 VAC | 440 VAC | |||
| 0.16 | 0.1 to 0.16 | 2.1 | – | – | 0.02 | 0.1 | 100 | 100 | 100 |
| 0.25 | 0.16 to 0.25 | 3.3 | 0.03 | 0.24 | 0.06 | 0.21 | |||
| 0.4 | 0.25 to 0.4 | 5.2 | 0.06 | 0.37 | 0.1 | 0.34 | |||
| 0.63 | 0.4 to 0.63 | 8.2 | --- | --- | 0.12 | 0.41 | |||
| 1 | 0.63 to 1 | 13 | 0.1 | 0.68 | 0.2 | 0.65 | |||
| 1.6 | 1 to 1.6 | 20.8 | 0.2 | 1.3 | 0.4 | 1.15 | |||
| 2.5 | 1.6 to 2.5 | 32.5 | 0.4 | 2.3 | 0.75 | 1.8 | |||
| 4 | 2.5 to 4 | 52 | 0.75 | 3.5 | 1.5 | 3.5 | |||
| 6.3 | 4 to 6.3 | 81.9 | – | – | 2.2 | 4.8 | 50 | ||
| 10 | 6.3 to 10 | 130 | 1.5 | 6.9 | 3.7 | 7.8 | 15 | ||
| 2.2 | 9.5 | ||||||||
| 13 | 9 to 13 | 169 | 2.2 | 9.5 | 5.5 | 10.5 | 50 | 10 | |
| 16 | 11 to 16 | 208 | 3.7 | 15.5 | 7.5 | 13.5 | 25 | ||
| 20 | 14 to 20 | 260 | 3.7 | 15.5 | 11 | 20 | 50 | ||
J7MC-3R-⬜ (high-performance type)
| Rated current
2
Maximum thermal current setting value. In [A] |
Current setting range Rated operating current [A] |
Instantaneous trip current [A] |
3-phase standard motor capacity
and full load current
2
Full load currents are values for 200 VAC
/ 50 Hz, 400 VAC / 50 Hz, 4P reference motors.
Before applying them, check the full load current of the motor used. |
Rated breaking current Icu [kA] | |||||
|---|---|---|---|---|---|---|---|---|---|
| 200-240 VAC | 380-440 VAC | ||||||||
| Capacity [kW] | Current [A] | Capacity [kW] | Current [A] | 240 VAC | 415 VAC | 440 VAC | |||
| 0.16 | 0.1 to 0.16 | 2.1 | – | – | 0.02 | 0.1 | 100 | 100 | 100 |
| 0.25 | 0.16 to 0.25 | 3.3 | 0.03 | 0.24 | 0.06 | 0.21 | |||
| 0.4 | 0.25 to 0.4 | 5.2 | 0.06 | 0.37 | 0.1 | 0.34 | |||
| 0.63 | 0.4 to 0.63 | 8.2 | --- | --- | 0.12 | 0.41 | |||
| 1 | 0.63 to 1 | 13 | 0.1 | 0.68 | 0.2 | 0.65 | |||
| 1.6 | 1 to 1.6 | 20.8 | 0.2 | 1.3 | 0.4 | 1.15 | |||
| 2.5 | 1.6 to 2.5 | 32.5 | 0.4 | 2.3 | 0.75 | 1.8 | |||
| 4 | 2.5 to 4 | 52 | 0.75 | 3.5 | 1.5 | 3.5 | |||
| 6.3 | 4 to 6.3 | 81.9 | – | – | 2.2 | 4.8 | |||
| 10 | 6.3 to 10 | 130 | 1.5 | 6.9 | 3.7 | 7.8 | 50 | ||
| 2.2 | 9.5 | ||||||||
| 13 | 9 to 13 | 169 | 2.2 | 9.5 | 5.5 | 10.5 | |||
| 16 | 11 to 16 | 208 | 3.7 | 15.5 | 7.5 | 13.5 | 50 | 35
2
JEM1195 breaking duty
"O", single time breaking capacity is 50 kA. |
|
| 20 | 14 to 20 | 260 | 3.7 | 15.5 | 11 | 20 | |||
Characteristics
| Model | J7MC-3P-⬜ (standard type) | J7MC-3R-⬜ (high-performance type) | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Item | ||||||||||||||||||||||||||
| Switch type | Rocker switch | Rotary switch | ||||||||||||||||||||||||
| Number of poles | 3 | |||||||||||||||||||||||||
| Rated current In | 0.16 to 20 A | |||||||||||||||||||||||||
| Rated operational voltage Ue | 200 to 690 V | |||||||||||||||||||||||||
| Rated frequency | 50/60 Hz | |||||||||||||||||||||||||
| Rated insulation voltage | 690VAC | |||||||||||||||||||||||||
| Rated impulse dielectric strength | 6 kV | |||||||||||||||||||||||||
| Use category | IEC 60947-2 (circuit breaker), JIS C 8201-2 |
Cat.A | ||||||||||||||||||||||||
| IEC 60947-4-1 (motor starter), JIS C 8201-4-1 |
AC-3 | |||||||||||||||||||||||||
| Trip class (IEC 60947-4-1/JIS C 8201-4-1) | 10 Trips within 4 minutes at 150% Ie on hot start, trips in 4 to 10 seconds at 720% Ie on cold start | |||||||||||||||||||||||||
| Instantaneous trip characteristics | 13 x Ie max. | |||||||||||||||||||||||||
| Power loss (3-phase reference value) | Rated current 0.16 to 2.5 A: 6 W Rated current 4 to 6.3 A: 6.5 W Rated current 10 to 20 A: 7 W |
Rated current 0.16 to 1.6 A: 6 W Rated current 2.5 to 4 A: 6.5 W Rated current 6.3 to 20 A: 7 W |
||||||||||||||||||||||||
| Endurance | Mechanical | 100,000 cycles In=0.16 to 20 A | ||||||||||||||||||||||||
| Electrical | 100,000 cycles In=0.16 to 20 A | |||||||||||||||||||||||||
| Number of terminal insertions and removals [cycles] | 20 | |||||||||||||||||||||||||
| Maximum operate frequency (motor starts) [cycles/hour] | 25 | |||||||||||||||||||||||||
| Phase failure protection | Yes | |||||||||||||||||||||||||
| Trip indicator | Yes | |||||||||||||||||||||||||
| Test trip function | Yes | |||||||||||||||||||||||||
| Rated limit breaking capacity Icu: Rated limit breaking capacity [kA] (Breaking duty O-CO) Ics: Rated operating breaking capacity [kA] (Breaking duty O-CO-CO) Ics=100%Icu (Icu=100 kA) |
Rated operational current Ie Current setting [A] |
IEC 60947-2/JIS C 8201-2 | UL | IEC 60947-2/JIS C 8201-2 | UL | |||||||||||||||||||||
| 240 V 200 V |
415 V 400 V |
460 V 440 V |
500 V | 690 V 600 V |
480 V | 240 V 200 V |
415 V 400 V |
460 V 440 V |
500 V | 690 V 600 V |
480 V | |||||||||||||||
| Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | |||
| 0.1-0.16 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.16-0.25 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.25-0.4 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.4-0.63 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.63-1 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 1-1.6 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 1.6-2.5 | 100 | 100 | 100 | 100 | 3 | 2 | 50 | 100 | 100 | 100 | 100 | 8 | 6 | 50 | ||||||||||||
| 2.5-4 | 100 | 100 | 100 | 100 | 3 | 2 | 50 | 100 | 100 | 100 | 100 | 8 | 6 | 50 | ||||||||||||
| 4-6.3 | 100 | 100 | 50 | 38 | 50 | 38 | 3 | 2 | 22 | 100 | 100 | 100 | 100 | 6 | 5 | 50 | ||||||||||
| 6.3-10 | 100 | 100 | 15 | 11 | 10 | 8 | 3 | 2 | 22 | 100 | 100 | 50 | 38 | 50 | 38 | 6 | 5 | 50 | ||||||||
| 9-13 | 100 | 50 | 38 | 10 | 8 | 6 | 5 | 3 | 2 | 22 | 100 | 100 | 50 | 38 | 42 | 32 | 6 | 5 | 50 | |||||||
| 11-16 | 100 | 25 | 19 | 10 | 8 | 6 | 5 | 3 | 2 | 22 | 100 | 50 | 38 | 35
2
JEM1195 breaking
duty "O", single time breaking capacity is 50 kA |
27 | 10 | 8 | 4 | 3 | 50 | ||||||
| 14-20 | 50 | 38 | 25 | 19 | 10 | 8 | 6 | 5 | 3 | 2 | 22 | 100 | 50 | 38 | 35
2
JEM1195 breaking
duty "O", single time breaking capacity is 50 kA |
27 | 10 | 8 | 4 | 3 | 50 | |||||
| Vibration resistance | Vibration: 10 to 55 Hz, acceleration: 15 m/s2 | |||||||||||||||||||||||||
| Shock resistance | Shock value 50 m/s2 | |||||||||||||||||||||||||
| Degree of protection | IP20 (IEC60529) | |||||||||||||||||||||||||
| Operating temperature | –20°C to +60°C | |||||||||||||||||||||||||
| Ambient storage temperature | –40°C to +80°C (no condensation or icing) | |||||||||||||||||||||||||
| Relative humidity | 95% RH max. (no condensation or icing) | |||||||||||||||||||||||||
| Altitude | 2000m max. | |||||||||||||||||||||||||
| Weight | Approx. 430 g | 460 g | ||||||||||||||||||||||||
| Applicable Standards | Safety Standard | EN 60947-2 (IEC 60947-2), UL60947-4-1, CSA 22.2 No.60947-4-1, CCC GB/T 14048.2, Electrical Appliances and Material Safety Act (Non-Specified Electrical Appliances and Materials) |
||||||||||||||||||||||||
Wie können wir Ihnen helfen?
Wenn Sie eine Frage haben oder ein Angebot anfordern möchten, kontaktieren Sie uns oder senden Sie eine Anfrage.
+49 (0)21 73 - 68 00 0
Kontaktieren Sie uns
Ihr Kontakt J7MC
Vielen Dank für Ihre Anfrage. Wir setzen uns umgehend mit Ihnen in Verbindung.
Es liegen zur Zeit technische Probleme vor. Ihre Übertragung war nicht erfolgreich. Entschuldigen Sie dies bitte und versuchen es später noch einmal. Details
Download+49 (0)21 73 - 68 00 0
+49 (0)21 73 - 68 00 0
Angebot anfordern
Angebot anfordern
Angebot für J7MC
Über dieses Formular erhalten Sie ein Angebot zu Ihrem ausgewählten Produkt. Bitte füllen Sie alle Felder aus, die diese * Markierung besitzen. Ihre persönlichen Daten werden natürlich vertraulich behandelt.
Vielen Dank für Ihre Angebots-Anfrage, die wir schnellstmöglich beantworten werden.
Es liegen zur Zeit technische Probleme vor. Ihre Übertragung war nicht erfolgreich. Entschuldigen Sie dies bitte und versuchen es später noch einmal. Details
DownloadAngebot anfordern
Angebot anfordern
Downloads
